Emerson LURAY ECO CF860BQ00 Manual Del Usuario página 28

15. Light Kit LED Driver Replacement
15.2
Remove the two knurled knobs and lockwashers from
the threaded studs. Retain the hardware for future
reinstallation (Figure 41).
Slide the ceiling cover downward to rest on top the
motor housing.
15.3
Removal of the Ceiling Fan Wires, See Section 7,
Reverse Steps 7.4 through 7.1.
Disconnect the wire connector from the fan motor black
wire and supply black wire (Figure 42)
Disconnect the wire connector from the fan motor white
wire and the supply white wire (Figure 42).
Disconnect the wire connector from the hanger ball,
hanger bracket and supply green wires (Figure 42).
Retain all hardware for future reinstallation.
15.4
Carefully remove the ceiling fan (hangerball/downrod)
from the hanger bracket (Figure 43).
Place the ceiling fan, downrod facing up, onto a secure
NOTE: Be very careful not to bend the blade
solid surface in preparation of the driver replacement.
assemblies while removing the ceiling fan.
Figure 41
SUPPLY, HANGER BRACKET, &
HANGER BALL GREEN WIRES
Figure 42
NOTE: SUPPLY WIRES AND FAN WIRES OMITTED FOR CLARITY.
Figure 43
28
(Continued)
CEILING
COVER
THREADED
STUDS (2)
LOCKWASHERS (2)
KNURLED
KNOBS (2)
SUPPLY & FAN
WHITE WIRES
SUPPLY &
FAN BLACK
WIRES
LISTED WIRE
CONNECTOR
OUTLET
BOX
HANGER
BRACKET
HANGER BALL/
DOWNROD
ASSEMBLY