Panasonic WV-CM1430/A Manual Del Usuario página 5

1. Power Switch (POWER)
This is a push-push type switch which turns the power
of the monitor on and off.
Press once and the switch remains down (;) for turn-
ing on the power of monitor.
Press again, the switch comes up (l) for turning off
the power of the monitor.
2. Power Indicator
This indicator lights up when the monitor is turned on.
3. Input Selection Switch (INPUT SELECT A/B)
This is a push-push type switch which selects the sig-
nal input to A or B.
Press once and the switch remains down (;) for
selecting the INPUT B signal.
Press again, the switch comes up (l) for selecting
the INPUT A signal.
4. Vertical Hold Control (V-HOLD)
This control is used to adjust the picture in vertically.
5. Colour Control (COLOUR)
Turn this control clockwise to increase the picture's
colour and turn this control counterclockwise to
decrease the picture's colour.
6. Colour Subcontrol
This control is preset at the factory.
7. Bright Control (BRIGHT)
Turn this control clockwise to increase the picture's
brightness and turn this control counterclockwise to
decrease the picture's brightness.
8. Bright Subcontrol
This control is preset at the factory.
9. Contrast Control (CONTRAST)
Turn this control clockwise to increase the picture's
contrast and turn this control counterclockwise to
decrease the picture's contrast.
10. Contrast Subcontrol
This control is preset at the factory.
11. Picture Adjustment (PICTURE)
Turn this control clockwise for sharp picture and turn
this control counterclockwise for soft picture.
All manuals and user guides at all-guides.com
-3-
12. Audio Volume (AUDIO)
Turn this volume clockwise to increase the audio level
and turn this volume counterclockwise to decrease the
audio level.
13. Focus Control (FOCUS)
This control is preset at the factory.
14. Screen Control
This control is preset at the factory. Do not adjust this
control. When the adjustment of this control is required,
refer to the qualified service personal.
15. Video Input Connector (INPUT B - VIDEO IN)
This input accepts a composite PAL video signal with
75Ω auto termination.
16. Video Output Connector (INPUT B - VIDEO OUT)
The video input signal connected to the Video Input
Connector (15) is looped through to this connector.
This connector becomes unterminated by connecting
a coaxial cable to it.
17. Audio Input Connector (INPUT B - AUDIO IN)
−8dB/Hi-Z audio signal can be supplied to this input
connector.
18. Audio Output Connector (INPUT B - AUDIO OUT)
The audio input signal connected to the Audio Input
Connector (17) is looped through to this connector.
19. Video Input Connector (INPUT A - VIDEO IN)
This input accepts a composite PAL video signal with
75Ω auto termination.
20. Video Output Connector (INPUT A - VIDEO OUT)
The video input signal connected to the Video Input
Connector (19) is looped through to this connector.
This connector becomes unterminated by connecting
a coaxial cable to it.
21. Audio Input Connector (INPUT A - AUDIO IN)
−8dB/Hi-Z audio signal can be supplied to this input
connector.
22. Audio Output Connector (INPUT A - AUDIO OUT)
The audio input signal connected to the Audio Input
Connector (21) is looped through to this connector.
23. Power Cord