Kenwood KHC29 Instrucciones página 15

Using the Drive Outlets
High Speed Outlet attachments
Lift off the high speed outlet cover . Ensure the medium
outlet cover is in place otherwise the appliance will not
operate.
Medium Speed Outlet attachments Lift off the medium
speed outlet cover .
Ensure the high speed outlet cover is in place otherwise
the appliance will not operate.
Food Processor
17
a
Small pusher
Large pusher
d
Feed tube
Bowl
f
Drive shaft
Knife blade
Discs (if supplied)
slicing/grating disc
slicing/grating disc
grating disc
style chipper disc
chipper disc
Assemble the Food Processor as shown in
17
illustration
1 Place the drive shaft onto the outlet.
2 Fit the bowl over the drive shaft with the
handle above the speed control and turn
clockwise until it locks into position.
3 Fit either the knife blade, one of the discs
or the citrus juicer. The knife blade and
cutting section of the discs are sharp so
always handle with care.
Hints and Tips
O Cut meat, bread and vegetables into 2cm
cubes before processing.
O Herbs are best chopped when clean and
dry.
O Take care not to over process when using
the knife blade.
b
c
e
Lid
g
h
Thick
i
Thin
j
Extra fine
k
Thin julienne
l
Standard
m
Extra thick grating disc
Hints and Tips
Do not process hot ingredients
O When making mayonnaise, put
all the ingredients, except the oil, into the
blender. Then, with the machine running,
remove the filler cap and add the oil slowly
and evenly.
O Thick mixtures, e.g. pates and dips, may
need scraping down. If the mixture is
difficult to process, add more liquid.
O To blend dry ingredients - cut into pieces,
remove the filler cap, then with the
appliance running, drop the pieces down
one by one.
O Do not use knife blade to chop ice cubes
or other hard foods such as spices, they
may damage the attachment.
O If adding almond essence or flavouring
avoid contact with plastic as this may
stain.
Discs
1 Choose which feed tube you want to use. The
pusher contains a smaller feed tube for
processing individual items or thin
ingredients.
2 Put the food into the feed tube.
3 Switch on and push down evenly with the
pusher - never put your fingers in the feed
tube.
To use the small feed tube - put the large pusher
inside the feed tube first.
To use the large feed tube - use both pushers
together.
Do not let the bowl fill up as far as the cutting
O
disc: empty it regularly.
Do not exceed the 'MAX' capacity level on the
O
bowl.
Hints and Tips
When using the reversible discs ensure that
O
the required cutting side is uppermost.
9