Controlling Somfy Rts Wireless Equipment; Adding Somfy Rts Equipment - SOMFY V 350 Manual De Instalacion Y Uso

V®350 video entry phone

6.1.2 Controlling Somfy RTS wireless equipment

The monitor is equipped with a Somfy Radio Technology (RTS) transmitter. It is only compatible with devices equipped with
Somfy Radio Technology (RTS).
It is used to control the following Somfy devices, individually or simultaneously:
- garage door motorisation,
- lighting receiver,
- roller shutter motorisation,
- gate motorisation.
- etc.
This function is enabled thanks to a radio channel system identified by pictograms (see "Adding Somfy RTS equipment"). Each
channel corresponds to an individual remote control and can be used to control one or more device(s). There is no limit to the
number of devices that can be controlled by a single channel. To control a channel, you just need to press on it.
Important: Check that the device to be controlled is wireless and within the radio range of the monitor.

Adding Somfy RTS equipment

Press on the touch-sensitive key corresponding to the location of the
first piece of equipment to be memorised.
Unless otherwise indicated, each step must then be validated to move
on to the next step.
Select the pictogram which represents the product to be memorised:
Awning Roller
shutter
Hinged
Sliding gate
gate
Press the PROG button of an RTS transmitter already paired with this
product for 3 seconds: the product should react. Refer to the product
instructions if it is a gate or garage door motorisation.
Press the touch-sensitive key corresponding to the
the monitor with the product and move on to the next step.
Press the touch-sensitive key corresponding to the
back.
Press the touch-sensitive keys corresponding to the commands
and and check the behaviour of the paired product.
Copyright© 2021 SOMFY ACTIVITES SA. All rights reserved.
Hinged Lighting
shutter ON/OFF
Garage Other RTS
door product
Socket
ON/OFF
arrow to pair
arrow to go
EN
12