Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Replacing
lamp
1.Disconnect the electrical plug.
2.Use the" "type screwdriver to remove the damaged lamp from lamp hole.
3.Disconnect the connectors between damaged lamp and lamp wire.
4.Connect the connectors between new lamp and lamp wire. Put the lamp click
into place of lamp hole.
Warning: Lamp replacement must be done by qualified after-sales service maintenance
personnel.
Required min. distance to surfaces (such as lids, oven
cloth or the like) in order to prevent hot parts and fire
hazards.
(- - - to be "0 45 m")
Only self shielded lamps can be used in order to prevent
undue hot parts, fire hazards and exposure to UV
radiation.
Replacement and maintenance
If the supply cord is damaged, it must be replaced by the manufacturer
its service agent or similarly qualified persons in order to avoid a hazard
12V
1WX2 Max
,
16
Information
The
power of
bulb
must not
be more
than
1W .
17
18
Publicidad
Tabla de contenido
