1
Off the unit.
2
Unscrew the air discharge housing.
3
Flip open the air discharge housing.
4
Clean the blower.
5
Close the air discharge housing and tighten it with screw.
• Do not operate any heating apparatus too close to the air conditioner unit. This may cause the plastic panel to melt or deform as a result
of the excessive heat.
WHEN THE UNIT IS NOT USED FOR AN EXTENDED PERIOD OF TIME
Operate the unit for 2 hours
with the following setting.
Operating mode : cool
Temperature : 30°C/86°F
All manuals and user guides at all-guides.com
! CAUTION
9
Remove the power plug.
If you are using an independent
electric circuit for your unit,
cut off the circuit.
Remove the batteries in the
remote control.