Legal And Normative Principles And Regulations; Regulations And Technical Rules Taken Into Account In The Design Or Manufacture Of The Attachment Devices; Regulations And Technical Rules; That Must Be Followed During The - Pfeifer HIT GK 8 Traducción Del Manual Original

3. Legal and normative
principles and regulations

3.1 Regulations and technical rules

taken into account in the design
or manufacture of the attachment
devices
Applicable EC Directives:
• EC machinery directive 2006/42/EC
Applied harmonised European standards:
• DIN EN 818-1 – Short link chain for lifting
purposes. Safety – General conditions of acceptance:
General acceptance conditions
• DIN EN 818-2 – Short link chain for lifting purposes.
Safety – Medium tolerance chain for chain slings:
Medium tolerance round steel chains for chain
slings – Quality grade 8
• DIN EN 818-4 – Short link chain for lifting purposes –
Safety – Part 4: Chain sling: Chain slings – Quality
grade 8
• DIN EN 818-6 – Short link chain for lifting purposes
– Safety – Part 6: Chain slings: Chain slings – Speci-
fication for information for use and maintenance
• DIN 21061:2020-02 (draft, formerly PAS 1061)
• DIN EN 1677-1 Components for attachment
devices – Safety – Part 1: Forged individual parts
Quality grade 8
• DIN EN 1677-2 Part 2: Forged hooks with safety latch
Quality grade 8
• DIN EN 1677-3 Part 3: Forged, self-locking hooks
Quality grade 8
• DIN EN 1677-4 Part 4: Individual links Quality grade 8
Chain slings 12/2021 / Subject to change!
4
3.2 Regulations and technical rules

that must be followed during the

use and during the examination

of the attachment devices

• Work Equipment Directive 2009/104/EC and its
national implementations
• Rules and regulations of the statutory accident
insurance institutions
• EN standards as well as national standards and other
recognised technical rules of the Member States of
the European Union, Turkey or other contracting
states to the Agreement on the European Economic
Area, depending on the place of use of the attachment
device. Examples of applied national regulations and
standards for the use and examination, as well as
rules for occupational safety with attachment devices:
• Germany: DGUV Rule 109-017 (formerly BGR 500)
Operation of work equipment (DGUV=German
Statutory Accident Insurance)
• Germany: DGUV Information 209-013
• Austria: AMVO (Work Equipment Regulation)
• Switzerland: FCOS guidelines
• etc.

4. Description/Technical data

PFEIFER 1-leg and multi-leg chain slings quality
grade 8, 10 and 12 are assembled from PFEIFER
chains, connecting links and accessories. They are
used to form a connection between a load to be lifted
and a crane hook (i.e. attach) to subsequently lift and
transport the load.
Every chain sling is identified according to EN 818-1.
Equipped with a WLL identification tag, which specifies
the working load limit for multi-leg chain slings depending
on the angle of inclination. Moreover, the number of chain
legs, the serial number and the nominal diameter of the
chain are specified on the WLL identification tag.