Care And Cleaning - Kohler Reve K-892-0 Instrucciones De Instalación

Rim
8. Complete the Installation - Drop-in Only
Cover the framing with water-resistant deck material.
NOTICE: Only apply silicone sealant where instructed.
Using silicone sealant, seal the joints between the water-resistant deck material and the bath rim at
the head and drain end of the bath only. Do not apply silicone sealant to the bath rim running the
length of the bath.
NOTICE: To ensure the bath rim is used as designed, allow a 1/16" (2 mm) gap between the bath rim
and the finished material.
Install the finished material. Ensure a 1/16" (2 mm) gap exists between the bath rim and the
finished material for the length of the bath.
Apply a bead of silicone sealant in the groove between the finished material and the bath rim for
the length of the bath.
Install the faucet trim according to the manufacturer's instructions.

Care and Cleaning

For best results, keep the following in mind when caring for your KOHLER product:
• Always test your cleaning solution on an inconspicuous area before applying to the entire surface.
• Wipe surfaces clean and rinse completely with water immediately after applying cleaner. Rinse and
dry any overspray that lands on nearby surfaces.
• Do not allow cleaners to soak on surfaces.
• Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring
pad to clean surfaces.
• The ideal cleaning technique is to rinse thoroughly and blot dry any water from the surface after
each use.
• Use a soft nylon brush on Safeguard
(dissolves 100% in water).
For detailed cleaning information and products to consider, visit kohler.com/clean. To order Care &
Cleaning information, call 1-800-456-4537.
1432009-2-A
Finished Material
Water-Resistant
Deck Material
Framing
Apply silicone sealant.
slip-resistant surfaces. Be sure to use a water-soluble cleaner
®
8
1/16"
(2 mm)
Gap
Kohler Co.