Sauder 411885 Instrucciones De Ensamblaje página 5

Do not tighten the HIDDEN CAMS in this step.
1 1
T2
(8 used)
(12 used)
D
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
Assemble your unit on a carpeted fl oor or on the empty carton to avoid scratching your unit or the fl oor.
Push twelve HIDDEN CAMS (S2) into the ENDS (A and B) and BOTTOM (D) as shown in the upper diagrams. Then, insert the
metal end of a CAM DOWEL (T2) into each HIDDEN CAM, except in the long edges of the ENDS (A and B).
Turn four CAM SCREWS (U2) into the FRONT LEGS (F and G) as shown in the lower right diagrams.
411885
Arrow
S2
B
Do not insert CAM
DOWELS into these holes.
Arrow
www.sauder.com/services
Look for this icon. It means a video
assembly tip is available at:
www.sauder.com/services/tips
S2
A
Arrow
S2
G
Arrow
Do not insert
CAM DOWELS
into this edge.
(4 used)
U2
F
Page 5