D-Ttl 3D Flash Mode With The Mecablitz 44 Af-4N - Metz 44 AF-3 N Manual De Instrucciones

Funcionamiento manual del flash
D
m
1
Fig. 11 / Grabado 11
A M
D
m
2
Fig. 12 / Grabado 12
Manual flash mode
Modo flash manuale
TTL
mm
Auto Zoom
TTL
mm
Auto Zoom
Setting the D-TTL flash mode (Fig. 11)
• Mount the mecablitz on the camera.
• Switch on the mecablitz and the camera.
• Lightly touch the camera's shutter release to
induce a data exchange between the flash unit
and the camera.
Continue depressing the "Mode" key until "D-TTL"
1
flashes on the LC display.
• The setting becomes immediately effective. The
LC display returns to its normal state after
approx. 5 sec.
4.2.1 D-TTL 3D flash mode with the
mecablitz 44 AF-4N
This flash mode is only possible in conjunc-
tion with "D-AF-Nikkor lenses". Some came-
ras (e.g. D100) do not support the D-TTL 3D
flash mode for SPOT exposure metering. This
flash mode will then either be automatically
cancelled or it cannot be activated so that
the normal D-TTL flash mode will be per-
formed.
The D-TTL 3D flash mode optimizes a balanced
exposure between subject and background (in-
cluding fill-in flash) in conjunction with digital SLR
cameras. Prior to exposure a series of almost invi-
sible measuring preflashes are fired by the meca-
blitz which are evaluated by the TTL multi-sensor
and the camera's micro-controller. The camera
then adapts TTL flash exposure optimally to the
given photographic situation. The camera-to-sub-
ject distance ("D-TTL-3D flash mode") is addi-
tionally taken into account when determining the
optimal flash output.
Setting the D-TTL 3D flash mode" (Fig. 12)
• Mount the mecablitz on the camera.
• Switch on the mecablitz and the camera.
• Lightly touch the camera's shutter release to
induce a data exchange between the flash unit
and the camera.
2 Continue depressing the "Mode" key until
"D TTL " flashes on the LC display.
• The setting becomes immediately effective. The
LC display returns to its normal state after
approx. 5 sec.
26
http://www.mynikon.com.pl