Publicidad
Funcionamiento automático del flash
96
Auto flash mode
Modo flash automatico
7. Flash modes
7.1 Auto flash mode of the mecablitz 36 C-2
☞
When in automatic flash mode the sensor integrated in
the mecablitz measures the light reflected from the sub-
ject. The flash unit automatically cuts off the flash as
soon as the amount of light required for correct expo-
sure has been reached. In this manner the aperture
does not have to be recalculated and reset when the
distance changes, provided that the subject remains
within the auto flash range indicated on the aperture
calculator.
• Set the main switch of the mecablitz 36 C-2 at the "A"
position.
• Set the ISO speed of the film loaded in the camera with the
upper "ISO" slide switch.
• Set the lower slide switch at the selected zoom position of
the reflector (28 mm, 35 mm, 50 mm or 85 mm).
Publicidad
Capítulos
