DECORATIVE EXTRACTOR HOOD
EN
Thank you for buying our hood. Please read these instructions carefully for its
optimum installation, use and maintenance.
Notes
Warning:
Use a rigid PVC pipe with a min. Ø l20 mm to evacuate fumes outside.
The above restrictions do not apply to hoods with no fumes outlet to outside
Install the hood in line with the instructions on the template
hood in line with the instructions on the template
For gas cooking appliances only: the minimum distance to the hood must be
Warning
If the extractor hood has a plug, connect it to a power socket in line with
applicable regulations, located in an accessible area.
If the hood does not have a plug, connect it directly to the electrical grid,
protected by a separator device accessible for disconnection, in line with local
regulations.
Warning:
The different control panels are described below. Check the panel model
(Fig. P1
2-
Extractor fan operating control pilot light.
Lighting on and off switch.
(Fig. P2
Lighting on and off.
2-
Lighting operating control pilot light.
to switch off the extractor fan.
4-
Extractor fan operating speed control pilot light.
Lighting on and off.
2-
Extractor fan on and off.
4-
Extractor fan speed display panel.
Increase extractor fan speed.
Enable extractor fan turbo speed.
7-
Enable and disable extractor fan timer.
provided.
(Fig. P3
Five-button panel (Fig. P4
Extractor fan operating control pilot light.
2-
Lighting on and off.
Extractor fan off.
4-
(Fig. P5
Filter clean warning display/button.
2-
Enable and disable extractor fan timer.
Lighting on and off.
4-
Extractor fan on and off.
2- Sliding touch panel for extractor fan speed control. Also used in combination
with button -3-.
Install
the
4- Enable and disable extractor fan timer.
The front panel automatically extends and retracts on switching the hood on/
off.
Hood maintenance
Warning
Exterior cleaning: use non-corrosive, liquid detergent and avoid the use of
abrasive cleaning products.
prevent solid remains from depositing on them.
Important
Warning
Important
The manufacturer:
- Is not responsible for any failure to observe the instructions given in this manual
and current safety regulations for the correct use of the equipment.
without prior notice.
additional information on our products.
11
(Fig. P6
-2-