Swarovski Optik STR 20-60x80 Manual Del Usuario página 15

2.5 ADJUSTMENT OF THE SCREW-IN-TYP EYE CUP
Use without eyeglasses:
Turn the eye cup (counter-clockwise) until it stops.
Use with eyeglasses:
Turn the eye cup (clockwise) until it stops.
2.6 USE OF THE ZOOM EYEPIECE
To change magnification:
Turning the adjustment ring to the right (clockwise) decreases
magnification.
Turning it to the left increases the magnification. You
will be able to read the magnification above the index
point.
28
STR / EN STR / DE
The reticle functions at any selected magnification. The target image and the reticle
magnification change at the same time.
2.7 FOCUSING
• For distant objects, turn the adjustment ring for focusing to
the right (clockwise).
• By turning the adjustment ring to the left (anti-clockwise),
you can observe objects that are nearer.
• In order to ensure fatigue-free observation, turn the adjust-
ment ring for focusing a bit to the left (anti-clockwise) until
the image becomes slightly unsharp. Then turn the adjustment ring to the right
(clockwise) until the maximum image definition is attained for the first time.
• To retain the image definition over the entire range of magnification, you should
carry out sharp focusing using the zoom eyepiece with the highest magnification.
2.8 OPERATING THE RETICLE BRIGHTNESS CONTROL
If the brightness control knob of the reticle is in the zero/neutral position, then no
reticle is visible, and the unit can be used like a typical commercially available
spotting scope.
STR / EN STR / DE
29