Technical Data; Accessories - Husqvarna TF 545P Manual De Usuario

• Be careful when you move the product on or off a
vehicle for transportation. Use an approved ramp.
Tilling width, mm
Tilling depth, mm
Engine
Fuel
Fuel tank capacity, l
Oil tank capacity, l
Cylinder displacement, cm
Max. power kW/hp @ rpm
Nominal power kW/hp @ rpm
Gears
Oil capacity gearbox, l
Gross weight, kg
Net weight, kg
Package dimensions, mm
To operate a ditcher (accessory)
1. If it is necessary for the operation, loosen and turn
the handlebar to the side for a better operation
position.
2. Set the speed lever to low speed. (Fig. 48)
3. Use the gear lever to select drive speed. Position 1
is slow speed and position 2 is fast speed. (Fig. 46)
4. Push down the throttle lock on the handle.
5. Push the clutch lever (A) in the direction of the
handle to start the operation. (Fig. 47)
6. Release the clutch lever (B) to stop the operation.
To operate a pump (accessory)
1. Set the speed lever to high speed. (Fig. 45)
2. Put the gear lever in the neutral gear position. (Fig.
41)
3. Push down the throttle lock on the handle.
4. Push the clutch lever (A) in the direction of the
handle to start the operation. (Fig. 47)
5. Release the clutch lever (B) to stop the operation.
12

Technical data

3

Accessories

1100
150-300
WM177F/P
Petrol
6.0
1.1
270
5.5/7.4 @ 3600
5.0/6.7 @ 3600
H, L, R, N, 2, 1
2.0
145
130
1030×690×850
1628 - 003 - 26.01.2022