Philips RQ1145 Manual Del Usuario página 27

All manuals and user guides at all-guides.com
Problem Possible cause
The shaver is not chamber is soiled.
entirely clean after
I clean it in the
Jet Clean System.
drops below the minimum level during
aborts.The cleaning light and the
at intervals and the holder returns to
its starting position.
The Jet Clean System is not connected
The Jet Clean to the mains.
System does not
work when I press
the on/off button.
There is no electrical connection
between the Jet Clean System and the
shaver.
The shaver is not You have not placed the shaver in the
fully charged after
I charge it in the only) properly.
charger/Jet Clean
types only).
ENGLISH
Solution
Empty and rinse the cleaning chamber
two lines (see chapter 'Cleaning and
maintenance').
Only use HQ200 Philips Cleaning Fluid.
Put the small plug in the Jet Clean
System and put the adapter in the wall
socket.
Press the shaver tightly into the holder
to lock it into place.
Make sure you press the shaver until it
locks into place.
27