GRAPHITE 59G262 Instrucciones De Uso página 14

1. Warning, take special precautions.
2. Read the instruction manual, observe warnings and safety conditions included in it!
3. Use personal protection equipment (safety goggles, ear protectors).
4. Use a dust mask.
5. Disconnect the power cord, before maintenance or repair works are begun.
6. Use protective clothes.
7. Protect against moisture.
8. Keep out of reach of children.
9. Tool with the II class insulation.
DESIGN AND APPLICATION
The plaster sander is a hand tool powered by a single-phase commutator motor. The sander is designed
for dry finishing sanding of walls and other surfaces coated with skimmed plaster. The moveable cover of
the sander working disc fits tightly to any wall surface. The sander is equipped with the system used for
connecting the tool to an external dust extraction system (e.g. dust bag, vacuum cleaner), which must
be connected during operation. The range of applications of the sander include renovation and building
works, as well as all types of DIY and around the house works.
The sander should be used with a connected dust extraction system, such as a dust bag or a workshop
vacuum cleaner adapted for plaster dust extraction.
DESCRIPTION OF GRAPHIC PAGES
The below list refers to device components shown in the graphic pages of this instruction manual.
1. Loops for arm belt
2. Carbon brush cover
3. Speed adjustment dial
4. Dust extraction connector
5. Switch lock button
6. Switch
7. Suction adjustment dial
8. Additional handle
9. Working disc cover
10. Working disc
*There can be differences between the drawing and real product.
DESCRIPTION OF USED GRAPHIC SIGNS
CAUTION
WARNING
ASSEMBLY/SETTINGS
INFORMATION
EQUIPMENT AND ACCESSORIES
1. Dust bag
2. Suction hose
3. Arm belt
4. Additional handle
5. Sanding paper (different gradation) - 14 pcs.
6. Hex key
7. Carry case
- 1 pcs.
- 1 pcs.
- 1 pcs.
- 1 pcs.
- 1 pcs.
- 1 pcs.
14