Connection to a TV and video components
E
COMPONENT IN/OUT jacks
COMPONENT VIDEO provides the best video quality and
should be used as your first choice.
If your DVD player and TV (or monitor) have COMPONENT
VIDEO jacks, connect them with quality component video
cables.
F
S-VIDEO or VIDEO jacks
S-VIDEO connection is your second choice and is superior to
the standard composite video connection.
If the component has an S-VIDEO jack, connect it with a
high quality S-VIDEO cable.
If neither COMPONENT VIDEO nor S-VIDEO is available,
connect the component with a high quality RCA cable
designed for video applications.
< The video signal from COMPONENT, S-VIDEO or VIDEO jacks
cannot be mixed.
For example, the signal input into the COMPONENT IN jacks
is output from the COMPONENT OUT jacks only.
Be sure to connect all the components via the same kind of
jacks.
12
All manuals and user guides at all-guides.com
F
VIDEO
P
R
VIDEO
S-VIDEO
COMPONENT
OUT
OUT
VIDEO OUT
DVD, VCR, etc.
Connection 2
E
P
Y
P
P
Y
B
R
B
COMPONENT
VIDEO IN
VIDEO
IN
TV (MONITOR)
G
AC OUTLET (switched)
Not available for UK model.
This outlet is active only when the unit is on.
Caution:
Make sure that the total power consumption of all
equipment connected to the outlet(s) does not exceed 100
watts.
H
AC Power Cord
Insert the supplied AC power cord in the AG-7D's socket.
After all other connections are complete, connect the plug
to the AC wall socket.
Do not use any power cords other than the one included
with this unit to avoid fire, electric shock, etc. If you are not
going to use the unit for some time, disconnect the power
cord from the wall socket. (Leaving the power cord
unconnected for longer than 14 days will cause the tuner
memory presets to be lost.)
Be sure to connect the power cord to an AC outlet which
supplies the correct voltage.
Hold the power plug when plugging or unplugging the
power cord.
ENGLISH
G
H
S-VIDEO IN