Subwoofer Setting - Teac AG-7D Manual Del Usuario

Abbreviations
FRONT L: front left
FRONT R: front right
CENTER: center
SURR L: surround left
SURR R: surround right
SURR-B: surround back
Abréviations
FRONT L: Avant gauche
FRONT R: Avant droite
CENTER: centre
SURR L: surround gauche
SURR R: surround droite
SURR-B: surround arrière
Abreviaturas
FRONT L: frontal izquierdo
FRONT R: frontal derecho
CENTER: central
SURR L: envolvente izquierdo
SURR R: envolvente derecho
SURR-B: envolvente posterior
34
All manuals and user guides at all-guides.com

Subwoofer Setting

SUB W-Y (Subwoofer-Yes):
Select this when a powered sub-woofer is connected.
SUB W-N (Subwoofer-No):
Select this when no sub-woofer is connected.
< If you select "SUB-W N (no subwoofer)", the front speaker is
automatically set to "L".
< To enjoy the full home theater experience, we recommend
the use of a powered sub-woofer.
Speaker Size Setting
Each time the SELECT button is pressed, the setting is
changed as follows:
L (Large):
Select this when the connected speakers can fully reproduce
sounds below the Crossover Frequency.
S (Small):
Select this when the connected speakers are rather small and
cannot reproduce sounds below the crossover frequency.
When this setting is selected, bass frequencies below the
crossover frequency are output from the sub-woofer (if no
sub-woofer is connected, from the front speakers).
N (None):
Select this when no speaker is connected. The sound is
output from the front (or surround) speakers.
< Depending on your selection, settings available for each
speaker changes.
< When the surround left and right speakers are set to "SURR N
(none)", the surround back speaker is also set to "SURR-B N
(none)" automatically.
Distance (front, center, surround)
Input the distance from your listening position to front, center
and surround speakers. The delay time is automatically
adjusted to improve the surround effect.
You can change the setting from 0.1 to 9 meters, at 0.1
meter's step.
Crossover Frequency
You can change the setting from 40 to 130 Hz in 10 Hz steps.
When the speaker size is set to "Small", bass frequencies
below the crossover frequency you set here are output from
the sub-woofer (if no sub-woofer is connected, from the front
speakers).
The default setting is 80 Hz.
Speaker Configuration 2
ENGLISH