Speaker Layouts For Dolby Virtual Speaker - Teac AG-7D Manual Del Usuario

1
2
2SPK (REF)
3SPK (REF)
Black: physically existent speakers
White: Virtual speakers
Noir: Enceintes existant physiquement
Blanc: Enceintes virtuelles
Negro: Altavoces físicamente existentes
Blanco: Altavoces virtuales
64
All manuals and user guides at all-guides.com

Speaker Layouts for Dolby Virtual Speaker

Dolby Virtual Speaker technology virtualizes the missing
speakers; in Wide mode, it virtualizes the necessary speakers and
enhances the surround experience.
There are four speaker layouts for Dolby Virtual Speaker.
1
Select DOLBY VS REF or DOLBY VS WIDE mode by
pressing the DSP button.
2 Press the PARAMETER button to change the setting.
Each time the PARAMETER button is pressed, the setting is
changed as follows:
DVS 2SPK (2-Speaker Layout)
DVS 3SPK (3-Speaker Layout)
DVS 4SPK (4-Speaker Layout)
DVS 5SPK (5-Speaker Layout)
2SPK (WIDE)
< DVS 4SPK and DVS 5SPK is available for DOLBY VS Wide
mode only.
3SPK (WIDE)
4SPK (WIDE)
5SPK (WIDE)
Select this when only two speakers (Front L/R) are available.
The missing speakers (Center and Surround L/R) will be
virtualized.
Select this when three speakers (Front L/R and Center) are
available.
The missing speakers (Surround L/R) will be virtualized.
Select this when four speakers (Front L/R and Surround L/R)
are available.
The missing speaker (Center) will be virtualized.
Select this when five speakers (Front L/R, Center and
Surround L/R) are available.
Dolby Virtual Speaker technology enhances the surround
experience.
ENGLISH