Teka FG-824.3 Instrucciones Para El Uso, Mantenimiento E Instalacion página 37

CHANGING THE OVEN BURNER INJECTOR (fig. 5-6)
• Ensure that the oven is electrically disconnected;
• fully open the oven door;
• take the bedplate out (fig. 5);
• slide the burner out as follows:
1. take the diffuser element C out, removing the nuts D;
2. move the plug holder bracket E plus thermocouple;
3. remove the screw B and slide out the burner tube;
4. remove the injector F with a 7 mm spanner and replace it following the instructions in table 2
(the injector must be locked to prevent it sliding out).
• refit the oven burner performing the above oprations in reverse order;
• replace the bedplate.
Pay particular attention to the plug wires and thermocouple tubes.
All manuals and user guides at all-guides.com
Fig. 5-6
35