Accessories; Pelvic Belt - Küschall COMPACTattract Manual Del Usuario

4 ACCESSORIES

4.1 Pelvic belt

Your wheelchair can be fitted with a pelvic belt which will prevent
you from sliding forward in the wheelchair or from falling out
of the wheelchair.
1589081-A
All manuals and user guides at all-guides.com
Opening the pelvic belt
1.
Closing the pelvic belt
1.
2. Pull the belt C until you are held securely in the wheelchair.
WARNING!
Risk of serious injuries through strangulation.
– Ensure that you are sitting fully back in the seat
and that the pelvis is as upright and symmetrical
as possible - not forward on one side or tilted
back.
– Position the lap belt so that the hip bones can
be felt above the belt.
– Adjust the length using the buckles so that
there is just sufficient room for your hand to
slide between your body and the belt. It is
recommended that the clasp is kept in a central
position, i.e. make adjustments to each side.
– Make sure that the belt cannot slide and the
clasp does not dissolve. Refit the pelvic belt if
necessary, ® specialist dealer.
– Check and possibly change these adjustments
each time the belt is used.
Push in the PRESS button and pull the catch A out of the
buckle B. The pelvic belt opens.
Push the catch A into the buckle B.
Accessories
17