Changing Operation Mode/Number - Wittkopp SmartCam Manual De Uso

SmartCam

4 Changing operation mode/number

In case of changing the operation mode/number all user codes will be deleted.
Master code, administrator code and facility-master code remains valid.
Changing the operation mode/number is only possible when the lock is opened.
Press and hold the key "6" for eg. 3 seconds.
1.
When releasing the key the green LED flashes permanently.
2. Enter your 6-digit master code e.g.
3. Enter the 2-digit number e.g.
4. Re-enter your 6-digit master code e.g
5. Re-enter the 2-digit number e.g.
6. The new operation mode/number is accepted.
Rel. 1.2
6
123456
11
123456
11
 
5