Wittkopp SmartCam Manual De Uso página 7

SmartCam
5.4 Changing a user code K1
Press and hold the key "0" for eg. 3 seconds.
1.
When releasing the key the green LED flashes permanently.
2. Enter your old 4-/6-digit user code e.g.
3. Enter your new 4-/6-digit user code e.g.
4. R-enter your new 4-/6-digit user code e.g.
5. The new user code is accepted.
5.5 Deleting a user code K1
Deleting a user code is only possible when the lock is closed.
Press and hold the key "3" for eg. 3 seconds.
1.
When releasing the key the green LED flashes permanently.
2. Enter your 6-digit administrator code e.g.
3. Enter the user PIN of the user who has to be deleted e.g. user 3.
4. The user code is deleted.
5.6 Changing the master code/administrator code K1
Changing the master code/administrator code is only possible when the lock is opened.
Press and hold the key "2" for eg. 3 seconds.
1.
When releasing the key the green LED flashes permanently.
2. Enter your 6-digit code e.g. administrator code.
3. Enter your new 6-digit code e.g.
4. Re-enter your new 6-digit code e.g.
5. The new code is accepted.
Rel. 1.2
0
1313 / 13
3333 / 33
3333 / 33
3
654321
3
2
654321
888888
888888
 
 
 
7