Tabla de contenido
Publicidad
SmartCam
5.7.3 Deleting the time delay K1
The time delay can only be deleted within the opening window.
1. Enter your 4-/6-digit user code e.g.
2. Wait until the end of the time delay.
3. Opening window starts.
4. Enter your 4-/6-digit user code e.g.
Turn the knob within 3 seconds into opening position.
5.
The lock is opened.
Press and hold the key "9" for eg. 3 seconds.
6.
When releasing the key the green LED flashes permanently.
7. Enter your 6-digit administrator code e.g.
8. Delete the time delay.
9. Delete the opening window.
10. Delete the time delay again.
11. Delete the opening window again.
5.8 Overview of users K1
This function provides an overview of the number of free or already occupied users (key 9 is not assigned).
Only the administrator can perform this function.
Press and hold the key "7" for eg. 3 seconds.
1.
When releasing the key the green LED flashes permanently.
2. Enter your 6-digit administrator code e.g.
3. Enter the user PIN that has to be checked e.g. users 3, 5, 6...
Rel. 1.2
3333 / 33
3333 / 33
9
654321
00
01
00
01
7
654321
3
5
6
,
,
...
every 10s
every 10s
free
occupied
9
Publicidad
Capítulos
Tabla de contenido
