Maintenance And Inspections - Canon imageRUNNER ADVANCE C350P Guía De Inicio

The laser beam can be harmful to human bodies.
)
Since radiation emitted inside the product is
completely confined within protective housings
and external covers, the laser beam cannot
escape from the machine during any phase of
user operation. Read the following remarks and
instructions for safety.
- Never open covers other than those instructed in
the manuals for this machine.
- Do not remove the following caution label which
is attached to the machine. If the label has been
removed, contact your local authorized Canon
dealer.
- If the laser beam escapes from the machine,
exposure may cause serious damage to your eyes.
- Controlling, adjusting, or operating the machine
in ways not mentioned in the manuals for this
machine may cause dangerous radiation to
escape from the machine.
IMPORTANT
Press (Energy Saver) for safety when the machine
will not be used for a long period of time, such as
overnight. Also, turn OFF the main power switch,
and disconnect the power cord for safety when the
machine will not be used for an extended period of
time, such as during consecutive holidays.
76
Important Safety Instructions

Maintenance and Inspections

WARNING
When cleaning the machine, first turn OFF the main
)
power switch, then disconnect the power cord.
Failure to observe these steps may result in a fire or
electrical shock.
Unplug the power plug periodically and clean with
)
a dry cloth to remove dust and grime. Accumulated
dust may absorb humidity in the air and may result
in a fire if it comes into contact with electricity.
Clean the machine using a slightly dampened cloth
)
with a mild detergent mixed with water. Do not use
alcohol, benzene, paint thinner, or other flammable
substances. Check detergent for flammability prior
to use. If flammable substances come into contact
with a high-voltage area inside the machine, it may
result in a fire or electrical shock.
There are some areas inside the machine which
)
are subject to high-voltages. When removing
jammed paper or when inspecting the inside of the
machine, do not allow necklaces, bracelets, or other
metal objects to touch the inside of the machine, as
this may result in burns or electrical shock.
Do not burn or throw used toner cartridges into
)
open flames, as this may cause the toner remaining
inside the cartridges to ignite, resulting in burns or
a fire.
Make sure that the power plug is firmly inserted
)
into the power outlet after cleaning the machine.
Do not use the machine while the connection is
loose, as doing so may cause a fire.
Check the power cord and power plug regularly. If
)
the following conditions occur, contact your local
authorized Canon dealer, as the condition may
cause a fire:
- There are burn marks on the power plug.
- The blade on the power plug is deformed or
broken.
- The power goes OFF and ON when the power
cord is bent.
- There are cuts, cracks, or indentations on the
power cord.
- A part of the power cord becomes hot.
Check the power cord and power plug regularly
)
to make sure that they are not handled in the
following manner, as this may result in a fire or
electrical shock:
- The connection part of the power plug is loose.
- Stress is being applied to the power cord by a
heavy object or by affixing it with staples.
- The power plug is loose.
- The power cord is tied in a bundle.
- The power cord protrudes into a walkway.
- The power cord is in front of a heater.