Programming Dvd Player/ Vcr Combo; Searching For Your Code - One for All URC-6131nw Guia Del Usuario

All manuals and user guides at all-guides.com
PVR 6 Owners Manual.fm Page 8 Monday, December 20, 2004 11:17 AM
O F A 6-D
NE OR LL EVICE
PROGRAMMING DVD
PLAYER/ VCR COMBO
1. Turn on the DVD Player/VCR Combo
and insert a DVD.
NOTE: Please read steps 2 through 4
completely before proceeding. Highlight or
write down the codes and device you wish to
program before starting step 2.
On the remote control, press DVD. Next,
2.
press and hold SET until the LED (red
light) blinks twice, then release SET.
3. Use the "Setup Codes for DVD/VCR
Combos (Códigos de Configuración
para Aparatos Combinados DVD/
Videograbadora)" (on page 36) to
locate the brand name and then enter
the first four-digit code for your device.
If performed correctly, the LED will
blink twice.
NOTE: If the LED did not blink twice, repeat
steps 2 through 4 and enter the same code
again.
4. Aim the remote control at the device
and press POWER once. It should turn
off. If it does not, repeat steps 2
through 4, trying each code for your
brand until you find one that works. If
it still does not work, try "Searching for
Your Code" below.
NOTE: If the device does not have a POWER
key, press the (PLAY) key.
5. If you've located a setup code that
works, but it also has a separate VCR
code, you'll also need to program it into
the remote control to access VCR
controls as follows:
8

Programming DVD Player/ VCR Combo

PVR U R
NIVERSAL EMOTE
a. Press VCR once. Then press and
hold the SET key until the LED
blinks twice.
b. Enter the VCR code for your DVD
Player/VCR Combo. If correct, the
LED will blink twice.
NOTE: If a separate VCR setup code is not
listed, you can use the VCR key to program a
separate VCR device or another device (see
"Re-assigning Device Keys" on page 11).
6. For future reference, write down the
working DVD Player/VCR combo code
in the below boxes:
DVD Player/VCR Code:
Brand Name:____________________
VCR Code (if used):
Brand Name:_____________________
SEARCHING FOR YOUR
CODE
If your device does not respond to the
remote control after trying all codes listed
for your brand, or if your brand is not listed
at all, try searching for your code. For
example, to search for a code for your TV:
On the remote control, press TV once.
1.
2. Press and hold SET until the LED (red
light) blinks twice, then release SET.
3. Enter 9 9 1. The LED will blink twice.
4. Aim the remote control at the TV and
slowly alternate between pressing
POWER and TV. Stop when the TV turns
off.
C
ONTROL