Sanus VLF628 Manual De Instrucciones página 16

STEP 2B
2
POSITION TEMPLATE
4X
Min. 24 in. (61.0 cm)
To calculate your precise wall plate location, check out
TIP:
TIP:
our HeightFinder at sanus.com [www.sanus.com/1172].
Position the wall plate template
Level and mark the hole locations.
16
(continued)
Visit
HeightFinder™
sanus.com
/1172
on the wall at your desired height.
14
3
DRILL
4X
14
CAUTION:
CAUTION:
Drill four pilot holes using a 3/8 in. (10 mm) diameter drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 3 ¾ in. (9.5 cm).
14
Never drill into the mortar between blocks. Never drill into the mortar between blocks.
3 ¾ in. (9.5 cm)
3/8 in.
(10 mm)