Radio Tuner Operation - Lenco IPT-6 Guia Del Usuario

16. Power socket ---- For the AC power cord connection.
17. RESET button ---- For resetting the device
18. Memory backup battery compartment
19. Subwoofer
20. 6 Main Speakers
21. LED Display
Remote Control
1. STANDBY button ----- To turn the device on and off.
2. VIDEO OUT ON/OFF button ----- Select video-out on/off in iPod/iPhone mode.
3. FUNC (Function) button ---- Select FM radio /
iPod/iPhone / AUX-In modes.
4. MEM button ----- Save radio preset station.
5. VOL +/- button ----- Adjust volume level up or down.
6. MUTE button ----- Mute the volume.
7. ALM 1/2 button ---- Turn the alarm 1/2 on and off; Set
alarm 1/2 time and alarm 1/2 source.
8. SLEEP button ---- Select the time duration of the
sleep timer.
9. MODE button ----- Set clock and 12/24 hour format.
10. 3D button ----- Select 3D sound effect.
11. CH +/- button ----- Select preset radio channel.
12. TUN +/- FF/FR button ----- In radio mode: Tune the
radio frequency up/down;
In iPod/iPhone mode: Skip tracks Forward / Backward;
perform high-speed search.
13. SNOOZE / DIMMER button ----- Activate the snooze
function; Turn LED display bright/dim.
14. Battery compartment
15. Infrared Transmitter
16. iPod / button ----- iPod/iPhone Play/Pause function.
18. ST./MONO button ----- Select FM stereo / mono receiving.
FM Antenna
Extend the FM antenna wire at the back panel for the best FM radio reception.
Radio Tuning
1. Press the POWER
2. Press the FUNC button to select FM radio mode. A radio symbol will appear on the display.
By pressing the ST./ MONO button, FM stereo or mono receiving will be selected. The LED
display will respectively show on (stereo)/ off (mono).
3. To manually tune to a desired station, repeatedly press the TUN
4. To automatically search for stations with strong signals, press and hold the TUN
button until the frequency digits on display begin to scan then release the button. The tuner
will stop on the first strong signal it finds.
Notes:
- Use manual tuning to select weaker stations that might be skipped during automatic tuning.
- If the automatic tuning does not stop on the exact frequency of the station, for example, it stops
on 100.9 MHz instead of 100.8 MHz, use the manual tuning method to "fine tune" to the exact
frequency of the desired station.
All manuals and user guides at all-guides.com
Description of Parts

Radio Tuner Operation

button to turn on the device.
7
15
8
9
10
11
12
13
14
/ button shortly.
1
2
3
16
4
17
5
6
7
/