Cleaning Your Air Conditioner
Fig. 1
Fig. 2
12
E-
To get the best possible use out of your air conditioner, you must clean it
regularly to remove the dust that accumulates on the air filter.
Before cleaning your air conditioner, ensure that you have switched
off the electric circuit breaker used for the unit.
CAUTION
1
Open the air-in grill.
Push the grill switches towards the middle simultaneously as indicated in
follow figure sketch. Then pull down the air-in grill.
The control box cables ,which are originally connected with the
main body electrical terminators must be pulled off before doing
CAUTION
as indicated above.
2
Take out the air-in grill.
3
Dismantle the air filter.
4
Clean the air filter (Vacuum cleaner or pure water may be used to clean the
air filter. If the dust accumulation is too heavy , please use soft brush and mild
detergent to clean it and dry out in cool place) .
The air-in side should face up when using vacuum cleaner. (See Fig. 1)
The air-in side should face down when using water. (See Fig. 2)
Do not dry out the air filter under direct sunshine or with fire.
CAUTION
5
Re-install the air filter.
6
Install and close the air-in grill in the reverse order of step 1 and 2 and connect
the control box cables to the corresponding terminators of the main body .
Note
High-static Pressure Parvis Split Type has no air filter.