Daikin UATYA-BBAY1 Manual De Instalación, Uso Y Mantenimiento página 10

Before work is started on the unit: check for potentially flammable atmospheres; Make sure there are
no possible ignition sources comply with the requirements specified by Annex HH of standard IEC
60335-2-40:2018, by local legislations, and, with respect to europen standards, by EN 378-4 and EN
13133", and by existing local regulations.Adhere to the requirements set by the local legislation and
by European standards EN378-4 and EN13313.
In units with capacitors and/or inverters, certain components can remain live for several minutes even
after having turned off the main switch.
Wait 10 minutes before working on the electrical parts of the unit.
Circuits supplied from external sources (made with orange cable) can remain live even after the power
supply to the unit has been turned off.
Work on the unit only if there is sufficient lighting for the type of work to be carried out.
Failure to comply with the instructions in this manual and any modifications made to the unit without prior written
consent, will immediately void the warranty.
The law regulating the use of stratospheric ozone depleting substances prohibits the release of
refrigerant gases into the environment and obliges owners to recover and return them to the dealer or
take them to special collection centres at the end of their operational life.
The refrigerant contained in the refrigerant circuit is included among the substances subject to special
control regulations provided for by law and must therefore be disposed of as indicated above.
Particular care should be taken during maintenance operations in order to reduce refrigerant leaks as
much as possible.
Translation from original instructions
Packaged Rooftop
10
We reserve the right to make changes without any prior notice.
4P645202-2
UATYA