Call Another Handset - Topcom ULTRA RANGE Serie Manual De Usuario

Hold down the paging key
5 seconds until the message counter display
station begins to flash with '
Registration mode on the base station is now activated for approx.
3 minutes. You must perform the following steps to register a
handset:
1. Press .
17
4 15
2. Press or repeatedly, select '
3. Press to confirm.
17
4 15
4. Press or repeatedly, select '
5. Press to confirm.
17
6. Enter the base station PIN code (system PIN, default 0000)
and press .
17
• The handset will now search for the base station and register
when it has found it. Following successful registration, the
display shows standby mode and the handset name and
number.
It is possible to de-register a handset from a base station. You
should do this, for example, if a handset is damaged and needs to
be replaced.
1. Press .
17
4 15
2. Press or repeatedly, select '
3. Press to confirm.
17
4 15
4. Press or repeatedly, select '
5. Press to confirm.
17
6. Enter the system PIN (base station PIN code) and press
.
17
7. Press 4 or 15 repeatedly to select the handset to be
de-registered and press
All manuals and user guides at all-guides.com
on the base station for more than
22
23 on the base
'-' '.
'.
to de-register.
17
These functions are only possible if more than one
handset is registered to the base station.

9.3.1 Call another handset

1. Press .
12
4
2. Press or
'. want to dial.
• Select '
• Press
3. Press
6
9.3.2 Answering an internal call
• '
1. Press 14
1. Lift the handset off its base station (if auto talk is selected, see
section "4.24 Auto talk").
• The handset number of the calling handset appear in the
display during the call.
2. Press
6
9.3.3 Answering an external call during an internal call
If you receive an external call during an internal call, you will hear
'.
the call waiting tone (double beep) in both handsets involved in the
internal call.
'.
1. Press
6
• The internal call is ended.
2. Press 14
• You have now answered the external call.
15
repeatedly and select the handset you
' to call all handsets.
to call the selected handset(s).
17
to hang up at the end of your call.
' appears in the display.
to answer the internal call.
to hang up at the end of your call.
.
.
27