Topcom ULTRA RANGE Serie Manual De Usuario página 34

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

– go to the beginning of the current message by pressing
once.
– go to the previous message by pressing
– stop playback by pressing
– go to the next message by pressing
– to delete the current played message, press
1. Press
on the handset:
2
When you have new messages, the first messages will be
played.
When you have no new messages you will enter the
'
' menu.
Select '
' and confirm
2. During playback, press
– '
' to repeat current message.
– '
' to go to the previous message.
– '
' to go to the next message.
– '
' to delete the current played message.
One can also erase all heard messages at one time. This erases
only the messages that have already been heard. New messages
are not erased.
1. Press the delete
key for more than 2 seconds.
A confirmation tone will be heard.
1. Select '
' in the '
2. Press
to confirm.
17
34
All manuals and user guides at all-guides.com
twice.
.
.
.
.
17
and select:
17
' menu.
If the memory is full, '
display. The base LED display
is on and answer record mode is set. If the answering machine is
turned on and a call comes in, the machine will automatically play
answering only outgoing message.
1. Erase all the messages after listening to them.
The memory is free again.
The answering machine can only be operated remotely using a
phone equipped with DTMF (Dual Tone Multi-Frequency, or tone
dialling). To be able to operate the answering machine remotely
you have to turn on the remote access (see "11.7 Turning on the
remote access").
1. Call your machine.
The answering machine picks up the line, you hear the
outgoing message and a beep.
2. While the outgoing message is played, slowly dial
followed by the base PIN code (default 0000).
You will hear a short beep for confirmation. The LED counter
on the base will show ' ' blinking and '
23
appear on the handset(s) display.
In case there are new messages, playback will start
immediately.
3. If there are no new messages the base will go to command
waiting mode:
Press '2' (listen to messages). The answer machine will play
the messages.
During playback, you have the following options:
' will appear on the handset
23
will show '
' blinking when it
8
'

Publicidad

Tabla de contenido
loading

Tabla de contenido