CYBEX SIRONA Manual De Instrucciones página 27

13
16
15
10
25
All manuals and user guides at all-guides.com
11
19
14
seCurinG by means oF Harness system
the shoulder belts are fi rmly attached to the headrest and must not be adjusted
separately. make sure that the headrest (9) is correctly locked in place before you
use the seat.
NOte! make sure that the child seat is free of toys and hard objects.
• rotate the CyBex sirona into the required loading position (see section,
„360° rotating FunCtion") and put the child in the child seat.
• loosen the shoulder belts (10) by activating the adjustment handle on the central
adjuster (13) and simultaneously pulling both shoulder belts (10) upwards.
• open the belt buckle (11) by pressing fi rmly on the red button.
• the belt tongues (14) can be fi xed sidewards on the cover. this area (19) is
magnetic.
NOte! always pull on the shoulder belt (10); never pull on the shoulder pads (15)
• Put the child in the child seat and adjust the shoulder belts (10) to fi t exactly over
your child's shoulders.
NOte! make sure that the shoulder belts (10) are not twisted or crossed over.
• Bring both belt tongues (14) together and lock them into place in the belt buckle
(11) with an audible „CliCk".
• gently and cautiously pull on the central adjuster belt (16), in order to tighten the
shoulder belts (10) until they lie against the body of your child.
• rotate the seat (18) back to its original position. as soon as the neutral position is
reached, the seat must be locked at least into the fi rst sitting position. this can be
noticed by an audible "CliCk ".
NOte! in order to gain optimum protection from the CyBex sirona, the shoulder
belts should lie as close as possible to the body.