Amprobe TMD-53 Manual De Uso página 16

All manuals and user guides at all-guides.com
To SET CH/ID to 00,00, press the "
" " power key for more than 6 seconds with the meter
powered down. The meter will set channel and ID to
00,00 status. The second display will show 00, which
means that the channel and ID has been set to 00.
To check the channel and ID of the meter
seconds, LCD's main display will show channel number,
the second display will show ID number.
Celsius or Fahrenheit user-selectable
Accuracy is specified for operating
including thermocouple error.
0.1 times the applicable accuracy
9
" key and
" key and " " for 5