Attaching Adapter Plate To Flat Panel Display - PEERLESS SmartMount ST630P Instalación Y Ensamblaje

Attaching Adapter Plate to Flat Panel Display

• If screws don't get three complete turns in the display inserts or if screws bottom out and bracket is still not tightly
secured, damage may occur to display or product may fail.
FOR VESA ® 75 MOUNTING PATTERN:
2
Choose hole pattern as shown below. Attach hook
plate (A) to back of display using four M4 x 10mm
screws (D) as shown below.
*Note: If hole pattern is in a pocket, attach hook
plate (A) to back of display using four M4 x 20mm
screws (E) and four retaining spacers (F) as
indicated below.
A
D
*For displays with
a hole pattern in a
pocket, spacers (F) go
between hook plate (A)
and display.
All manuals and user guides at all-guides.com
WARNING
F
6 of 23
®
FOR VESA 100 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach hook
plate (A) to back of display using four M4 x 10mm
screws (D) as shown below.
A
D
ISSUED: 02-05-09 SHEET #: 201-9421-11 04-05-11