SPINDLE LOCK BUTTON
See Figure 4.
The spindle lock button locks the spindle and stops the
blade from rotating. Depress and hold the lock button while
installing, changing, or removing blade.
SWITCH TRIGGER
See Figure 5.
To prevent unauthorized use of the compound miter saw,
disconnect it from the power supply and lock the switch in
the off position. To lock the switch, install a padlock (not
included) through the hole in the switch trigger. A lock with
a long shackle up to 9/32 in. diameter may be used. When
the lock is installed and locked, the switch is inoperable.
Store the padlock key in another location.
The following tools (not included) are needed for making adjustments or installing the blade:
All manuals and user guides at all-guides.com
FEATURES
TOOLS NEEDED
COMBINATION WRENCHES (2)
(10 mm, 12 mm)
PHILLIPS SCREWDRIVER
FRAMING SQUARE
SPINDLE
LOCK BUTTON
SWITCH
TRIGGER
11 — English
HEX KEYS (3)
(3 mm, 5 mm, 6 mm)
COMBINATION
SQUARE
SWITCH
TRIGGER
Fig. 4
PADLOCK
Fig. 5
Fig. 6