ESAB EMP235ic Instrucciones De Uso página 32

6 CONTROL PANEL
Preflow The time the
shielding gas stays on
before the welding arc is
started
Postflow The time the
shielding gas stays on after
the welding arc is stopped
Seconds
Settings on user manual
menu
Spool Gun
2T, Trigger On/OFF
4T, Trigger Hold/Lock
Amps
Arc force On stick
welding-increasing amps
when the arc length is
shortened to reduce or
eliminate the freezing of the
stick electrode in the weld
puddle
Downslope Sloping the
current down over a period
of time at the end of the
weld cycle
Hot start The increase of
amps when striking the
electrode to reduce sticking
0463 479 001
Smart MIG
Cancel
Saving welding programs for
a specific application when in
the Memory Mode
Burnback Adjusting the time
when the voltage stays on
after the wire feed is stopped
to keep the wire from freezing
in the weld puddle
Stick
Lift-TIG
User Manual on main menu
Plate thickness at sMIG
mode
Trim bar Changing the weld
bead profile from flat to convex
or flat to concave
Bead profile, concave
Bead profile, convex
- 32 - © ESAB AB 2017