Power Source And Wire Feeder Maintenance - ESAB EMP235ic Instrucciones De Uso

7 MAINTENANCE
Interval
Every 3 months
Clean or replace
unreadable labels.
Every 6 months
Clean inside
7.2

Power source and wire feeder maintenance

Perform a power source cleaning each time you replace a Ø4 in. (100 mm), Ø8 in. (200 mm)
or Ø12 in. (300 mm) wire bobbin.
0463 479 001
Clean weld
terminals.
equipment.
Area to maintain
Check or replace weld cables.
- 36 - © ESAB AB 2017