User Responsibility - ESAB EMP235ic Instrucciones De Uso

1 SAFETY PRECAUTIONS
1.3

User responsibility

Users of ESAB equipment have the ultimate responsibility for ensuring that anyone who
works on or near the equipment observes all the relevant safety precautions. Safety
precautions must meet or exceed the standard requirements that apply to this type of
equipment. The following recommendations should be observed, in addition to the standard
regulations that apply to the workplace.
All work must be carried out by trained personnel well-acquainted with the operation of the
equipment. Incorrect operation of the equipment may lead to hazardous situations, which
could result in injury to the operator and damage to the equipment.
1. Anyone who uses the equipment must be familiar with:
○ its operation
○ location of emergency stops and safety features
○ its function
○ the relevant safety precautions
○ welding and cutting methods or other applicable operations of the equipment
2. The operator must ensure that:
○ no unauthorized person is within the working area of the equipment when it is
started up
○ no-one is unprotected when the arc is struck or work is started with the
equipment
3. The workplace must:
○ be suitable for the purpose
○ be free from drafts to the extent possible, in order to maintain effective
ventilation and the control of welding fumes and work byproducts
4. Personal safety equipment:
○ Always wear recommended personal safety equipment, such as safety glasses,
flame-proof clothing, safety gloves
○ Do not wear loose-fitting items, such as scarves, bracelets, rings, etc., which
could become trapped or cause burns
5. General precautions:
○ Make sure the return cable is connected securely
○ Work on high voltage equipment may only be carried out by a qualified
electrician
○ Appropriate fire extinguishing equipment must be clearly marked and close at
hand
○ Lubrication and maintenance must not be carried out on the equipment during
operation
WARNING!
Arc welding and cutting may cause injury to yourself and others. Take
precautions when welding and cutting. Ask for your employer's safety practices,
which should be based on the manufacturer's hazard data.
0463 479 001 - 10 - © ESAB AB 2017