Sub-Zero Classic Serie Guía De Uso Y Cuidado página 13

Storage
Freezer Storage
ICE BIN
To remove the ice bin (over-and-under models):
Pull the freezer drawer open until it stops.
1
2 Lift the ice bin up and out. Refer to the illustration
below.
To remove the ice bin (side-by-side models):
Pull the ice bin forward until it stops.
1
2 Lift the ice bin straight up. Refer to the illustration
below.
To install, pull the carrier out and align the bottom of
3
the ice bin with the carrier.
Slide the ice bin back into position.
4
Over-and-under models Side-by-side models
To remove the ice bin (side-by-side dispenser models):
1 Pull the ice bin forward until it stops.
Lift to clear the carrier assembly along the back, then
2
pull forward and out. Refer to the illustration below.
Side-by-side dispenser models
subzero.com | 13