Electrical Field Connections - Briggs & Stratton 40689 Manual De Instalación Y Operación

21. For Additional information on the operation of the
generator controller please refer to the online "Operation
Instructions GC1030 Series GENSET Controller" manual
associated with your generator.
14

Electrical Field Connections

WARNING
Generator and utility voltage could cause electrical shock or burn resulting in death or serious injury.
• Installation must be performed by a licensed professional.
• Disconnect all sources of electricity before installing or servicing equipment.
• Ground system before applying power.
WARNING
Hazardous Voltage - Installing low and high voltage wire in same conduit could cause electric shock or burns, resulting in
death or serious injury.
• Do not run low and high voltage wire in the same conduit unless the insulation rating on ALL wiring is rated for 600V. See
NFPA 70 for more information.
Low Voltage connections are made via a field connections terminal block (E, Figure 16) in main electrical area. Compare this
illustration with your generator to familiarize yourself with the location of these connections.
15
19