Generator Placement; Cold Weather Kit - Briggs & Stratton 40689 Manual De Instalación Y Operación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Generator Placement

Before installing the generator, consult with the owner
and convey the following requirements, which must be
satisfied before the installation is complete. There are two
equally important safety concerns in regards to carbon
monoxide poisoning and fire. There are also several general
location guidelines that must be met before the installation is
considered complete.
WARNING 
Engine exhaust contains carbon monoxide, a poisonous gas
that could kill you in minutes. You cannot smell it, see it, or
taste it. Even if you do not smell exhaust fumes, you could
still be exposed to carbon monoxide gas.
Operate this product ONLY outdoors in an area that will
not accumulate deadly exhaust gas.
Direct exhaust gas away from any windows, doors,
ventilation intakes, soffit vents, crawl spaces, open
garage doors or other openings that can allow exhaust
gas to enter inside or be drawn into a potentially
occupied building or structure.
Carbon monoxide detector(s) MUST be installed and
maintained indoors according to the manufacturer's
instructions/recommendations. Smoke alarms cannot
detect carbon monoxide gas.
If you start to feel sick, dizzy, weak, or your carbon
monoxide alarm sounds while using this product, get to
fresh air right away. Call emergency services. You may
have carbon monoxide poisoning.
DO NOT run this product inside homes, garages,
basements, crawlspaces, sheds, or other partially-
enclosed spaces even if using fans or opening doors
and windows for ventilation. Carbon monoxide can
quickly build up in these spaces and can linger for
hours, even after this product has shut off.
8
1
(A) Exhaust outlet side of enclosure.
(B) Air inlet side of enclosure.

Cold Weather Kit

If the generator operates in temperatures below 30°F (-1°C),
it is recommended that a Cold Weather Kit be installed.
2
Cold Weather Kit, Part No. 6578, includes:
Battery Warmer
Battery Stand
Fuel Regulator Warmer Kit, Part Number 6845, includes:
Regulator warmer
Deflector bracket
Harness
BRIGGSandSTRATTON.COM

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

40692

Tabla de contenido