Technical Data; Preparations At The Workplace; Charging The Battery - Hilti SC 4WL-22 Manual De Instrucciones Original

3.6 Fence
Use of the single arm fence allows precise cuts to be made along the edge of the workpiece, or strips of
even width to be cut.
The fence can be fitted on either side of the base plate.
4

Technical data

4.1 Product
Rated voltage
Weight without battery
Saw blade diameter
Saw blade disc thickness
Kerf width
Saw blade arbor size
Rated speed under no load
Maximum cutting depth
Bevel cutting angle
Storage temperature
Ambient temperature for operation
4.2 Battery
Battery operating voltage
Weight, battery
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
5

Preparations at the workplace

WARNING
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.1

Charging the battery

1. Before charging the battery, read the operating instructions for the charger.
2. Make sure that the contacts on the battery and the contacts on the charger are clean and dry.
10 English
21.6 V
3.0 kg
(6.6 lb)
160 mm ... 165 mm
(6.3 in ... 6.5 in)
0.5 mm ... 1.5 mm
(0.02 in ... 0.06 in)
1.5 mm ... 2 mm
(0.06 in ... 0.1 in)
15.8 mm
(0.62 in)
4,000 /min
57 mm
(2.2 in)
0° ... 50°
−20 ℃ ... 70 ℃
(−4 ℉ ... 158 ℉)
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
2276129
21.6 V
See the end of these
operating instructions
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
−20 ℃ ... 40 ℃
(−4 ℉ ... 104 ℉)
−10 ℃ ... 45 ℃
(14 ℉ ... 113 ℉)
*2276129*