Technical Data - Hilti NURON SB 4-22 Manual De Instrucciones

Status
All LEDs show in sequence, followed by one (1)
LED quick-flashing yellow.
All LEDs show in sequence, followed by one (1)
LED showing constantly red.
4

Technical data

Weight in accordance with EPTA Procedure 01, without
battery
Rated voltage
No-load speed
Max. cutting depth
Dimensions, product (Length x width x height)
Dimensions, bandsaw blade (Length x width x thickness)
Ambient temperature for operation
Storage temperature
4.1 Battery
Battery operating voltage
Weight, battery
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
4.2 Noise information and vibration values in accordance with EN 60745
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure. The data given represents the main applications of the power tool.
However, if the power tool is used for different applications, with different accessory tools, or is poorly
maintained, the data can vary. This can significantly increase exposure over the total working period. An
accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This can significantly reduce exposure over the
total working period. Identify additional safety measures to protect the operator from the effects of noise
and/or vibration, for example: Maintaining the power tool and accessory tools, keeping the hands warm,
organization of work patterns.
Noise information
Sound power level (L
WA
Uncertainty for the sound power level (K
Sound pressure level (L
Uncertainty for the sound pressure level (K
Total vibration
Vibration emission value for cutting in
metal (ah,CM)
Vibration emission value for cutting in
wood (ah,CW)
*2289590*
)
)
WA
)
pA
)
pA
B 22­55
B 22­255
B 22­55
2289590
Meaning
The check to ascertain the battery's state of health
did not complete. Repeat the procedure, or consult
Hilti Service.
If a connected product can still be used, the re-
maining battery capacity is below 50 %.
If a connected product can no longer be used, the
battery has reached the end of its useful life and
has to be replaced. Consult Hilti Service.
3.2 kg
21.6 V
172 m/min
63.5 mm
351 mm x 248 mm x 217 mm
733 mm x 12.7 mm x 0.5 mm or 733 mm
x 12.4 mm x 0.35 mm
−17 ℃ ... 60 ℃
−20 ℃ ... 70 ℃
88 dB(A)
3 dB(A)
77 dB(A)
3 dB(A)
1.4 m/s²
2.0 m/s²
1.4 m/s²
21.6 V
See the end of these
operating instructions
−17 ℃ ... 60 ℃
−20 ℃ ... 40 ℃
−10 ℃ ... 45 ℃
English 21