Accessories; Technical Data - Hilti WSR 36‑A Manual Del Usuario

3. Accessories

Saw blades
Charger for Li‐ion batteries
Battery
Battery
en
Pipe‐cutting adapter

4. Technical data

Right of technical changes reserved.
Power tool
Rated voltage (DC voltage)
Weight in accordance with EPTA procedure 01/2003
Dimensions (L x W x H)
Stroke rate
Stroke
Stroke rate adjustment
Blade holder
Battery
Rated voltage
Capacity
Energy capacity
Weight
Type of cell
Number of cells
Temperature monitoring during
charging
Temperature monitoring during
discharging
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a
standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a
preliminary assessment of exposure. The declared vibration emission level represents the main applications of
the tool. However if the tool is used for different applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly increase the exposure level over the total working
period. An estimation of the level of exposure to vibration should also take into account the times when the
tool is switched off or when it is running but not actually doing the job. This may significantly reduce the
exposure level over the total working period. Identify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of
work patterns.
18
with ½" connection end
C 4/36‑ACS
B36/2.4 Li‐ion
B36/3.3 Li‐ion
WSR 36‑A
36 V
4.37 kg
455 mm x 92 mm x 228 mm
0...2,850/min
32 mm
Variable stroke rate with electronic control, stroke
rate regulator with 6 settings
Keyless, for ¹/₂" standard blades
B 36/2.4 Li‐ion
36 V
2.4 Ah
86.4 Wh
1.17 kg
Li‑ion
10
Yes
Yes
B 36/3.3 Li‐ion
36 V
3.3 Ah
118.8 Wh
1.6 kg
Li‑ion
30
Yes
Yes