Before First Use; Preparing For Use; 7�1 Connecting An Air Hose - AmazonBasics B087RJK3GQ Manual Original

EN

6. Before First Use

DANGER
Risk of suffocation!
» Keep any packaging materials away
from children – these materials
are a potential source of danger,
e�g� suffocation�

7. Preparing For Use

WARNING
Risk of injury!
» Compressed air can be dangerous�
Ensure that you are familiar with all
precautions relating to the use of air
compressors and compressed air
supplies before using the tool�
7.1 Connecting an air hose
WARNING
Risk of injury!
» Before performing any assembly and/or
adjustment procedures, make sure the
air hose (not included) is disconnected
from the air inlet (M)�
1� Remove the protective cap covering the
air inlet (M)� Store the protective cap in a
safe place�
M
12
» Check the tool for transport damages�
» Remove all the packing materials�
2� If an automatic lubricator is not being
used, add 2-3 drops of air tool oil (not
included) every two to three hours of use
into the air inlet (M)�
T
3� Blow out air line to remove any dirt or
moisture, then connect a flexible air hose
(not provided) to the air inlet (M)� For
hoses equipped with a quick-connector,
use male quick-connector (R)�
Flexible air hose
M
R