1�2 Projectile Hazard; 1�3 Entanglement Hazards; 1�4 Operating Hazard; 1�5 Repetitive Motion Hazards - AmazonBasics B087RJK3GQ Manual Original

EN
1.2 Projectile hazard
» Be aware that failure of the workpiece
or accessories, or even of the inserted
tool itself can generate high-velocity
projectiles�
» Always wear impact-resistant eye
protection during operation of the die
grinder or when changing accessories on
the tool� The grade of protection required
should be assessed for each use�
» Ensure that the workpiece is securely
fixed�
» Check regularly that the speed of the die
grinder is not higher than that marked on
it� The speed checks shall be carried out
without the abrasive product mounted
and in accordance with the instructions
given�
» Ensure that sparks and debris resulting
from use do not create a hazard�
» Disconnect the grinder from the energy
supply before changing abrasive product
and servicing�
» The risk to others should also be
assessed while doing this�
1.3 Entanglement hazards
» Chocking, scalping and/or lacerations
can occur if loose clothing, personal
jewelery, neck wear, hair or gloves are not
kept away from the tool and accessories�
1.4 Operating hazard
» Avoid contact with the rotating spindle
and inserted tool to prevent cutting of
hands and other body parts�
» Use of the tool can expose the operators
hands to hazards, including cuts and
abrasions and heat� Wear suitable gloves
to protect hands�
» Operators and maintenance personnel
shall be physically able to handle the
bulk, weight and power of the tool�
» Hold the tool correctly; be ready to
counteract normal or sudden movements
and have both hands available�
4
» Maintain a balance body position and
secure footing�
» Release the start and stop device in case
of an interruption of the energy supply�
» Use only lubricants recommended in this
user manual�
» Personal protective safety glasses shall
be used; suitable gloves and protective
clothing are recommended�
» A rotary file shall not be operated at a
speed exceeding the rated speed�
» For overhead work, wear a safety helmet�
» Be aware that there is a running-on for
several seconds of the rotary inserted tool
after the start-and-stop device has been
released�
» Do not operate the tool in explosive
atmospheres, such as in the presence
of flammable liquids, gases, or dust� The
abrasives are able to create sparks when
working material, resulting in the ignition
of the flammable dust or fumes�
1.5 Repetitive motion hazards
» When using a die grinder to perform
work-related activities, the operator can
experience discomfort in the hands,
arms, shoulders, neck or other parts of
the body�
» While using a die grinder, the operator
should adopt a comfortable posture
whilst maintaining a secure footing
and avoiding awkward or off balance
postures� The operator should change
posture during extended tasks; this can
help avoid discomfort and fatigue�
» If the operator experiences symptoms
such as persistent or recurring
discomfort, pain, throbbing, aching,
tingling, numbness, burning sensations
or stiffness, these warning signs should
not be ignored� The operator consult a
qualified health professional�