5. Do not face battery when making final connection.
6. When disconnecting charger, always do so in reverse sequence of connecting procedure and
break first connection while as far away from battery as practical.
7. A marine (boat) battery must be removed and charged on shore. To charge it on board
requires equipment specially designed for marine use.
GROUNDING AND AC POWER CORD CONNECTION
Charger should be grounded to reduce risk of electric shock. Charger is equipped with an electric
cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged
into an outlet that is properly installed and grounded in accordance with all local codes and
ordinances.
DANGER: Never alter AC cord or plug provided. If it will not fit outlet, have proper outlet
installed by a qualified electrician. Improper connection can result in a risk of an electric shock.
This battery charger is for use on a nominal, 120-volt circuit, and has a grounding plug that
looks like the plug illustrated in (A) below. A temporary adapter, which looks like the adapter
illustrated in (B) and (C), may be used to connect this plug to a two-pole receptacle, as shown
in (B), if a properly grounded outlet is not available. The temporary adapter should be used only
until a properly grounded outlet can be installed by a qualified electrician.
DANGER: Before using adapter as illustrated, be certain that center screw of outlet plate is
grounded. The green-colored rigid ear or lug extending from adapter must be connected to a
properly grounded outlet. Make certain it is grounded. If necessary, replace original outlet cover
plate screw with a longer screw that will secure adapter ear or lug to outlet cover plate and make
ground connection to grounded outlet.
All manuals and user guides at all-guides.com
5