Attaching The Handle - Schumacher Electric CARQUEST CBC 7600 Manual De Instruccion

ASSEMBLY INSTRUCTIONS
CAUTION: You must attach the handle before operating the charger.
REQUIREMENTS
• handle
• four screws
• screwdriver

ATTACHING THE HANDLE

To attach the charger handle:
1. Locate the handle and four screws provided. The charger comes with one of two types of
handles.
2. Remove the top two screws at the rear from both sides of the charger.
3. Straddle the handle over the charger and align the mounting holes. If the charger has the Type
2 handle, make sure the handle is flush with the edge of the charger. Refer to the drawing
below.
4. Attach the handle with the four screws and tighten securely.
All manuals and user guides at all-guides.com
6
Notice offset of holes
to orient handle correctly.