Child Safety Device - AEG IKE85753FB Manual De Instrucciones

Heat setting
1 - 2
3 - 4
5
6 - 9
7.2 Pause
This function sets all cooking zones that
operate to the lowest heat setting.
Press to activate the function.
The heat setting is lowered to 1.
To deactivate the function: press
previous heat setting comes on.
7.3 Lock
You can lock the control panel while the hob
operates. It prevents an accidental change of
the heat setting.
Set the heat setting first.
To activate the function: press
To deactivate the function: press
The function deactivates as you
deactivate the hob.

7.4 Child Safety Device

This function prevents an accidental
operation of the hob.
To activate the function: press
set any heat setting. Press and hold
seconds, until the indicator above the symbol
appears. Deactivate the hob with
The function stays active when
you deactivate the hob. The
indicator above
To deactivate the function: press
not set any heat setting. Press and hold
for 3 seconds, until the indicator above the
symbol disappears. Deactivate the hob with
.
56 ENGLISH
The hob deactivates
after
6 hours
5 hours
4 hours
1.5 hours
. The
.
again.
. Do not
for 3
.
is on.
. Do
Cooking with the function activated: press
, then press for 3 seconds, until the
indicator above the symbol disappears. You
can operate the hob. When you deactivate
the hob with the function operates again.
7.5 Bridge
The function operates when the
pot covers the centres of the two
zones. For more information on
the correct placement of
cookware refer to "Using the
cooking zones".
This function connects two cooking zones
and they operate as one.
First set the heat setting for one of the
cooking zones.
To activate the function for left / right
cooking zones: touch
change the heat setting touch one of the left /
right control sensors.
To deactivate the function: touch
The cooking zones operate independently.
7.6 Hob²Hood
It is an advanced automatic function which
connects the hob to a special hood. Both the
hob and the hood have an infrared signal
communicator. Speed of the fan is defined
automatically on basis of mode setting and
temperature of the hottest cookware on the
hob. You can also operate the fan from the
hob manually.
For most of the hoods the
remote system is originally
deactivated. Activate it before
you use the function. For more
information refer to hood user
manual.
Operating the function automatically
To operate the function automatically set the
automatic mode to H1 – H6. The hob is
originally set to H5. The hood reacts
whenever you operate the hob. The hob
recognizes temperature of the cookware
automatically and adjusts the speed of the
fan.
/ . To set or
/ .